Vancouver, British Columbia--(Newsfile Corp. - November 12, 2019) - M3 Metals Corp. (TSXV: MT) (FSE: XOVN.F) ("M3 Metals" or the "Company") is pleased to provide an update on the Mohave Mine Gold Project where an ongoing extensive data compilation and modelling program is underway. The Company has identified additional areas with highly anomalous gold rock and soil samples surrounding historic gold resources and old mine workings that remain untested (see Figure 1). The "Golden North" area includes the historic Golden Door mine and Jim & Jerry mine, and the Golden Ram, Scout, Red Gap, Epidote Ridge, and Apex zones. These zones and historic mines are north of the Klondike Mine which was the focus of historic resource definition and mine development planning by previous operators.
The Company is also pleased to announce that it has recently engaged independent consultants to begin the permitting procedures for exploration and development on the Mohave Mine Gold Project. It is anticipated that permitting for an initial development phase may be included in the current permitting and required environmental studies.
Adrian Smith, President of M3 Metals comments "we are pleased to begin work with the recently engaged independent consultants that have extensive experience permitting exploration and development stage projects within the western United States. We have now begun assembling the required documentation for an extensive (200 plus drill hole) drilling campaign and are taking the initial steps in the permitting process for preliminary production."
Significant work was done by the previous operators in preparation for open pit mining at the Klondyke mine centrally located on the Project including development of a crushing circuit and heap-leach infrastructure. Previously over 12 million has been spent on development and infrastructure with the majority remaining in place and in good condition.
The Company continues to make progress with the historic data compilation currently underway. In the Golden North area of the Project the Golden Door mine and the Jim & Jerry mines are centred within widespread alteration and mineralization that indicates a much larger and untested system than what was previously defined. High-grade rock samples, predominantly collected as chip samples from outcrop, are widely distributed surrounding these historic areas (see Figure 1). These samples include 17.35 grams per tonne gold over 2 meters from outcrop, over 200 metres northwest of the Golden Door mine. Additional prospects and small pits run for several hundred metres from the Golden Door mine towards the Golden Ram area indicating that the entire area is part of a significant mineralizing system. Currently the highly anomalous samples tie together the Red Gap area, Golden Door Mine, Jim and Jerry Mine, Scout area, and the Golden Ram area outlining a gold system that is at least 1.5 kilometres long and remains open (see attached figure 1).
Figure 1: Mohave Mine Gold Project Golden Door Mine Area Map
To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5509/49609_f673834264e2e8e4_001full.jpg
The Company has now identified several areas in the Golden North area of the Project as high priority drilling targets. These areas are extensions of the historic resource areas and have highly anomalous gold in outcrop and soil samples. The planned drilling program will test several of the new target areas and include confirmation drilling to bring historic resources into modern compliance.
BLOCK 103 IRON ORE PROJECT
The Company is pleased to update that it continues to work closely with Hatch to complete the re-scoping study currently underway on its wholly owned Block 103 iron ore project. The current work is focusing on the near-term completion of the engineering study as a Class 4 AACE International standard report that will highlight the economics and potentially result in significantly reduced capital expenditure costs required to achieve production. The report can be used towards the completion of a Pre-Feasibility or Bankable Feasibility Study. The key focus remains to bring the initial capital cost down below one billion from the previously defined 6.5 billion, and to outline a phased capacity approach to increase the economic viability.
The Block 103 Project is a high-quality magnetite iron ore project that can produce a high-grade clean iron ore concentrate. Historic 2013 metallurgical studies show a 69 - 70 per-cent premium total-iron concentrate product which is considered very high-grade and has a growing demand globally. The product is used for blending with lower quality ores now becoming more prevalent. The result of incorporating this high-grade product is a significant reduction of emissions including C02 during the smelting process. In addition to the environmental benefits from incorporating the high-grade ore there are cost benefits including reduction of overall volume required attributing to the increasing premium above and beyond the current benchmark iron prices.
Additional information is available at www.m3metalscorp.com.
Disclaimer
The Company discloses that a qualified person has not done sufficient work to classify the historical estimate as current mineral resources or mineral reserves, and the issuer is not treating the historical estimate as current mineral resources or mineral reserve. Furthermore, the Company has not independently verified the samples and grades presented in this release and considers them to be historic in nature, and not compliant with NI 43-101 standards. The Company also does not guarantee the completeness of the database as it has not independently confirmed and reviewed all of the historic records at this time.
Adrian Smith, P.Geo., is Qualified Person as defined by National Instrument 43-101 for the above-mentioned project. The QP is a member in good standing of the Association of Professional Engineers and Geoscientists of British Columbia (APEGBC) and the Professional Engineers & Geoscientists Newfoundland & Labrador (PEGNL) as a registered Professional Geoscientist (P.Geo.). Mr. Smith has reviewed and approved the technical information disclosed above.
ABOUT M3 METALS CORP.
M3 Metals Corp. is a Canadian listed Company, focused on creating shareholder value through discoveries and strategic development of mineral properties in North America. For additional information please visit the Company's website at www.m3metalscorp.com. You may also email
M3 METALS CORP.
"Adrian Smith"
Adrian Smith
President
F: 604-602-1606
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain "Forward-Looking Statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words "anticipate", "believe", "estimate", "expect", "target, "plan", "forecast", "may", "schedule" and similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, currency risks including the exchange rate of US$ for CDN$, changes in exploration costs and government royalties or taxes in Canada, the United States or other jurisdictions and other factors or information. Such statements represent the Company's current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/49609
M3 Metals Corp. (TSXV: MT) (FSE: XOVN.F) ("M3 Metals" or the "Company") is pleased to announce that it has secured the extensive physical historic database on the Mohave Mine Gold Project. The database records cover everything from historic resource drilling to mine planning and engineering, construction reports, geology reports and targeting.
M3 Metals initial efforts to compile and digitize the historic data has resulted in identifying significant target areas. The most prominent area, newly termed the Dixie King (See Figure 1), shows potential for a large-scale gold system over a two-by-two-kilometre area which overlaps with a string of historic mines commonly referred to as the Dixie Mines. This area has not seen any modern exploration.
Highlights:
- two by two-kilometre target area never drill tested
- Individual soil samples up to 3.7 g/t gold
- Individual rock samples up to 125.6 g/t gold
- No drilling on southern part of Project
The historically reported high-grade underground mines on the property have not been exploited at a commercial scale and remain in place. These areas have the potential to be brought into a 43-101 compliant resource with an aggressive drilling program. Little effort from the previous operators focused on testing new targets or expanding on the historical resources, instead work focused on construction of the heap leach operation and infrastructure. Regional geological models indicate that there may be depth extensions or "feeder zones" beneath the well mineralized areas on the property in-line with similar systems in the region. Mineralization on the project area is shown to occur across multiple rock types attributing to the well-developed nature and the potential size of the gold system.
Figure 1: Mohave Mine Gold Project Dixie King Area Soil Map
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/5509/48730_e1508e2214097886_001full.jpg
Moving Forward
The Company is currently completing an inventory on all historic records while digitizing and reviewing the geological data including the historic soil, rock, and drillhole assays. Once complete the data will to be used in drill hole targeting.
Following the data compilation and targeting exercise currently underway, the Company plans to file an application for an aggressive drilling program aiming to bring the historic resources into compliance and identify new areas and extensions that may significantly increase their size. The Company will continue to update the market as appropriate.
Additional information is available on the Mohave Mine Gold Project page at www.m3metalscorp.com.
Disclaimer
The Company discloses that a qualified person has not done sufficient work to classify the historical estimate as current mineral resources or mineral reserves, and the issuer is not treating the historical estimate as current mineral resources or mineral reserve. Furthermore, the Company has not independently verified the samples and grades presented in this release and considers them to be historic in nature, and not compliant with NI 43-101 standards. The Company also does not guarantee the completeness of the database as it has not independently confirmed and reviewed all of the historic records at this time.
Adrian Smith, P.Geo., is Qualified Person as defined by National Instrument 43-101 for the above-mentioned project. The QP is a member in good standing of the Association of Professional Engineers and Geoscientists of British Columbia (APEGBC) and the Professional Engineers & Geoscientists Newfoundland & Labrador (PEGNL) as a registered Professional Geoscientist (P.Geo.). Mr. Smith has reviewed and approved the technical information disclosed above.
ABOUT M3 METALS CORP.
M3 Metals Corp. is a Canadian listed Company, focused on creating shareholder value through discoveries and strategic development of mineral properties in North America. For additional information please visit the Company's website at www.m3metalscorp.com. You may also email
M3 METALS CORP.
"Adrian Smith"
Adrian Smith
President
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain "Forward-Looking Statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words "anticipate", "believe", "estimate", "expect", "target, "plan", "forecast", "may", "schedule" and similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, currency risks including the exchange rate of US$ for CDN$, changes in exploration costs and government royalties or taxes in Canada, the United States or other jurisdictions and other factors or information. Such statements represent the Company's current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/48730
M3 Metals Corp. (TSX-V: MT; FSE: XOVN.F) (“M3 Metals” or the “Company”) is pleased to announce that it has secured an option (the “Option”) from two separate vendors (the “Vendors”) to acquire a 100% right, title and interest in the Mohave Mine Gold Project (the “Project”) comprised of a total of 160 claims including lode claims and mill-site claims. The Project area covers numerous historic gold mines in the Weaver mining district, Mohave County, Arizona, USA. In addition to the historic gold mines on the Project, there is an approximate 5-kilometre gold-in-soil and gold-in-rock geochemical anomaly that extends across the entire length of the Project (see Figure 1). Large areas of the anomalous gold geochemistry including several historic gold mines have not had any modern exploration or drilling. The Company has secured the mineral rights to all the historic mines falling within the Project and believes they may be related to a property wide gold system.
There have been more than 550 historic drill holes totaling approximately 68,000 feet drilled on the project primarily focusing on the development of historic non-compliant resources within limited areas on the Project (see Figure 1 for areal extent of historic drilling). All the historic drilling has been done in the northern one-fourth of the property, and most of these holes were shallow, 100 foot-deep, air-track holes, many of which stopped in mineralization. Most of the work was done by private companies in the 1980’s and 1990’s who spent approximately 12 million developing the historic resources in the northern part of the Project rather than exploring the potential for a much larger deposit.
Previous development work includes blasting of an initial bench at the Klondyke Mine (see Figure 2) representing the beginning of open-pit style operations. The blasted material remains stockpiled next to the primary jaw crusher located at the 350 tonne-per-hour crushing facility that remains on the Project’s mill-site claims where heap-leach infrastructure including a heap-leach pad, buildings, a jaw crusher, two cone crushers and a conveyor system were installed and remain in good condition (see Figure 3).
Significant potential for identifying and defining new mineralized areas remains as is evident from widespread elevated gold-in-soil and mineralized rock outcrops occurring across the Project. Potential targets include expanding on historic drilled areas on the northern half of the Project and the large elevated geochemical untested/undrilled areas and historic small-scale underground mines that occur on the southern half.
Currently the Company is engaged in an aggressive data compilation and data discovery exercise and plans to update the market as appropriate.
Adrian Smith, President of M3 Metals comments “We are extremely pleased with the acquisition of this advanced-stage project that still has significant upside. Historically the private owners were focused on development and did not test the numerous remaining targets on the Project for its larger potential. We are eager to begin an aggressive drilling campaign on the extensive target areas on the southern portion of the property while expanding on those to the north.”
Figure 1: Mohave Mine Gold Project Claim Map & Soil Geochemistry
Figure 2. Initial Bench Development at the Klondyke Mine
Figure 3. Mohave Mine Gold Project 350 tonne-per-hour crushing plant
Additional information is available on the Mohave Gold Project page at www.m3metalscorp.com.
Terms and Conditions of the Agreement:
The Company can exercise the Option to acquire a 100% right, title and interest in and to the Mohave Project by making the following cash payments, claim fee cost reimbursements and exploration expenditures (with all dollar figures being in USD$):
Cash Payments and Claim Fee Cost Reimbursements:
(i) $50,000 within ten (10) days of execution of the Agreement;
(ii) Claim Fee Reimbursement: Within ten (10) days of both execution of the Agreement and receipt by MLN, from the Vendors, of proof of payment by them to the BLM of the claim maintenance fees for the Claims for the period September 1, 2019 to August 31, 2020 (the "Fees"), pay to the Vendors the amount of the Fees as reimbursement of their costs in maintaining the Claims during negotiation of the Agreement;
(iii) On or before that day which is ten (10) days after the Payment Commencement Date, the sum of $75,000 (the "Second Payment");
(iv) On or before that day which is ten (10) days after the first anniversary of the Payment Commencement Date, the sum of $100,000 (the "Third Payment");
(v) On or before that day which is ten (10) days after the second anniversary date of the Payment Commencement Date, the sum of $150,000 (the "Fourth Payment");
(vi) On or before that day which is ten (10) days after the third anniversary date of the Payment Commencement Date, the sum of $200,000 (the "Fifth payment"); and
(vii) On or before that day which is ten (10) days after the fourth anniversary date of the Payment Commencement Date, the sum of $3,000,000 (the "Final Payment").
Where "Payment Commencement Date" means the earlier of: (i) the receipt of US Bureau of Land Management approval of certain exploration and development permit applications on the Mohave Project; and (ii) eighteen (18) months after the effective date of the Agreement provided that the Payment Commencement Date cannot be less than twelve (12) months from the effective date of the Agreement.
Expenditures:
To exercise the Option, the Company must, in addition to making the payments above, make the following exploration expenditures:
(i) $50,000 on or before the Payment Commencement Date;(ii) $200,000 in additional expenditures (for total aggregate expenditures of $250,000) after the Payment Commencement Date but on or before the date of the Third Payment;
(iii) $300,000 in additional expenditures (for total aggregate expenditures of $550,000) after the date of the Third Payment but on or before the date of the Fourth Payment;
(iv) $350,000 in additional expenditures (for total aggregate expenditures of $900,000) after the date of the Fourth Payment but on or before the date of the Fifth Payment; and
(v) $400,000 in additional expenditures (for total aggregate expenditures of $1,300,000) after the date of the Fifth Payment but on or before the date of the Final Payment.
Upon the payment of the $3,000,000 Final Payment, the Agreement provides that the Company will grant a 1.5% net smelter royalty (the "Royalty") to the Vendors.
Further details of the Agreement are available in a material change report which, together with this news release, is filed on SEDAR under the Company's issuer profile.
A finder's fee is payable by the Vendors, not by the Company, in connection with the Agreement. The Company has no liability under the terms and conditions of the Agreement to the finder for the finder's fee although, under the terms and conditions of the Agreement, the Company has been directed by the Vendors to direct some portions of the Vendor's payments, and of the Royalty, to the finder.
The Agreement may be subject to its acceptance for filing by the TSX Venture Exchange.
Management Changes
The Company reports that Andrew Bowering has resigned as a director of the Company. The Company would like to thank Mr. Bowering for his contributions to the Company and wish him the best with his future endeavours.
Disclaimer
The Company discloses that a qualified person has not done sufficient work to classify the historical estimate as current mineral resources or mineral reserves, and the issuer is not treating the historical estimate as current mineral resources or mineral reserve. Furthermore, the Company has not independently verified the samples and grades presented in this release and considers them to be historic in nature, and not compliant with NI 43-101 standards.
Adrian Smith, P.Geo., is Qualified Person as defined by National Instrument 43-101 for the above-mentioned project. The QP is a member in good standing of the Association of Professional Engineers and Geoscientists of British Columbia (APEGBC) and the Professional Engineers & Geoscientists Newfoundland & Labrador (PEGNL) as a registered Professional Geoscientist (P.Geo.). Mr. Smith has reviewed and approved the technical information disclosed above.
ABOUT M3 METALS CORP.
M3 Metals Corp. is a Canadian listed Company, focused on creating shareholder value through discoveries and strategic development of mineral properties in North America. For additional information please visit the Company’s website at www.m3metalscorp.com. You may also email
M3 METALS CORP.
“Adrian Smith”
Adrian Smith
President
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain “Forward-Looking Statements” within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”, “schedule” and similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, currency risks including the exchange rate of US$ for CDN$, changes in exploration costs and government royalties or taxes in Canada, the United States or other jurisdictions and other factors or information. Such statements represent the Company’s current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.
Kosta Tsoutsis, CEO of M3 Metals comments, "We are extremely pleased to be moving forward on the Block 103 project with such an experienced group. By electing to work with Hatch we gain access to their extensive knowledge and experience taking projects from a conceptual stage into production right here in our backyard."
To date the Company has spent over 38 million advancing the project to a PEA stage (Preliminary Economic Assessment). The new report will allow the Company to take the initial step in advancing the Project past the PEA stage while allowing the scope of the project to be optimized reducing overall costs. The engagement of Hatch is a strategic step that the Company believes will play an integral part in moving the project forward.
The Block 103 Iron Ore Project Objective
M3 Metals is focused on optimizing the economics and reduce the capital requirements for the development and operation of the Block 103 project. Current objectives are highlighted below:
Significantly reduce the overall cost estimates from the historic 2013 Preliminary Economic Assessment (PEA)
Implement phased-capacity-increase-approach to increase economic viability
Utilize organic growth to achieve completion of full-scale operation
Highlight the robust nature of the project long term
Calculate key project metrics (ex. Capital Cost, Operating Cost, IRR, NPV)
Use new report towards completion of Pre-Feasibility Study (PFS) as next step
The newly commissioned report will be completed to meet the AACE International (American Association of Cost Engineering) classification standards at a Class 4 estimate level. This report can be used towards a Pre-Feasibility Study (PFS) or Bankable Feasibility Study (BFS) and will encompass the initial re-scoping of the project development to estimate the capital requirements and operating costs of the Block 103 Iron Ore Project.
Block 103 is located near well established infrastructure in the heart of the Labrador Trough, Newfoundland and Labrador, approximately 30 km northwest from the town of Schefferville, Quebec and 1,200 kilometres by air northeast of Montréal, QC. Previous work by the Company includes geological mapping, geophysical surveys and diamond drilling programs. Total drilling now stands at 115 drill holes aggregating over 28,000 metres. Two zones of mineralization have been defined on the Property; namely the Northwest Zone and the Greenbush Zone where the focus of the mineral resource estimate has been on the Greenbush Zone.
Additional information is available on the Block 103 Project page at www.m3metalscorp.com
Disclaimer
Adrian Smith, P.Geo., is Qualified Person as defined by National Instrument 43-101 for the above-mentioned project. The QP is a member in good standing of the Association of Professional Engineers and Geoscientists of British Columbia (APEGBC) and the Professional Engineers & Geoscientists Newfoundland & Labrador (PEGNL) as a registered Professional Geoscientist (P.Geo.). Mr. Smith has reviewed and approved the technical information disclosed above.
The Mineral Resource estimate for the Block 103 Property is based on results from 81 diamond drill holes totaling 23,735 metres and is effective as of February 4, 2013. Mr. Michael Kociumbas, P.Geo., and Mr. Rick Risto, P.Geo., both with independent firm WGM, are Qualified Persons as defined by NI 43-101. Mr. Risto has reviewed and approved the underlying sampling, analytical and test data used for the estimate and Mr. Kociumbas is responsible for auditing the in-house Mineral Resource estimate as supplied by the Company and has approved the technical data contained above.
WGM is of the opinion that the iron mineralization delineated on the property will be amenable to open pit mining. The estimate is classified as an Inferred Mineral Resource, consistent with the CIM definitions referred to in NI 43-101. Mineral resources, which are not mineral reserves, do not have demonstrated economic viability. The Company is not aware of any environmental, permitting, legal, title, taxation, socio-political, marketing or other issues which may materially affect its estimate of Mineral Resources.
ABOUT M3 METALS CORP.
M3 Metals Corp. is a Canadian listed Company, focused on creating shareholder value through discoveries and strategic development of mineral properties in North America. For additional information please visit the Company's website at www.m3metalscorp.com. You may also email
M3 METALS CORP.
"Kosta Tsoutsis"Kosta Tsoutsis
CEO
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain "Forward-Looking Statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words "anticipate", "believe", "estimate", "expect", "target, "plan", "forecast", "may", "schedule" and similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, currency risks including the exchange rate of US$ for CDN$, changes in exploration costs and government royalties or taxes in Canada, the United States or other jurisdictions and other factors or information. Such statements represent the Company's current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/46713